#A-30 does not contain cadmium and is often used as an alternate to cadmium containing alloys when the brazed assembly comes in contact with food or dairy products. Its slightly higher melt temperature provides improved mechanical strengths when exposed to elevated temperatures. It is used extensively in joining of copper, brass, nickel-silvers, and ferrous alloys.
|Melting Pt.||1250 ºF 677 ºC|
|Flow Pt.||1410 ºF 766 ºC|
|Resale Options||Brazing Rod
|Preform Options||Brazing Discs Brazing Rings
|Approx. Wire Length (BCuP/lb.) (BAg/Tr.oz)||280 in @ 0.031 diameter
31 in @ 0.093 diameter
70 in @ 0.062 diameter
Typical applications are the joining of ferrous, nonferrous and dissimilar metals and alloys with close joint clearances.
Good for refrigeration assemblies where higher temperatures can be employed. Copper, nickel-silvers, and other non ferrous.
Standard forms of #A-30 are wire, strip, and preforms.
It is essential that adequate ventilation be provided so that personnel will not inhale gases and fumes while brazing. The operation and maintenance of brazing equipment or facility should conform to the provisions of America National Standard ANSI/ASC Z49.1, "Safety in Welding, Cutting and Allied Processing". For more complete information, refer to
the Material Safety Data Sheet for #A-30.
Bellman-Melcor distinguishes itself as a provider of premium quality brazing alloys at industry competitive prices. Our extensive inventory of brazing and soldering alloys ensures that in most cases your order can be available for immediate delivery.
- AWS: BAg-20
- EN: AG 204
- Lucas: Silvaloy 300
- PI: Silver Braze 30
- UNS: P07301
- Brazing Temperature Range High: 1510 F / 821 C
- Brazing Temperature Range Low: 1460 F / 793 C
- Liquidus: 1410 F / 766 C
- Solidus: 1250 F / 677 C
- Cu: 38%
- Zn: 32%
- Ag: 30%
The information and recommendations contained in this publication have been provided without charge & compiled from sources believed to be reliable and to represent the best information available on the subject at the time of issue. No warranty, guarantee, or representation is made by the Prince and Izant Company, Inc. as to the absolute correctness or sufficiency of any representation contained in this and other publications; Prince and Izant Company, Inc. assumes no responsibility in connection therewith; nor can it be assumed that all acceptable safety measures are contained in this and other publications, or that other or additional measures may not be required under particular or exceptional conditions or circumstances. The company and product names referenced herein are for identification purposes only. All trademarks and registered trademarks are the property of their respective owners.